Preliminary Procedure

1. Remove the HVAC module assembly. Refer to HVAC Module Assembly Replacement .
2. Disconnect the electrical connector from the recirculation actuator.

1

Recirculation Actuator Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
1.5 N·m (13 lb in)

2

Recirculation Actuator

3

Air Inlet Assembly Screw (Qty: 2)

Tighten
1.5 N·m (13 lb in)

4

Air Inlet Assembly

Tip
Tilt the rear of the air inlet assembly upward to release front mounting tabs.