2
| Rear Bumper Fascia Trailer Hitch Accessory Hole Cover
Procedure
- To remove, turn the fasteners on the lower tabs 90 degrees counterclockwise.
- Grip the lower edge of the cover and rotate up and out approximately 45 degrees.
- Disengage the upper attachments on cover by pulling down.
- To install, hold cover at a 45 degree angle to vehicle and engage upper tabs on the hitch cover into the chrome slots in fascia.
- Rotate the bottom of cover forward until the lower tabs align with the lower fascia slots.
- Snap hitch cover into place by pushing the upper corners forward.
- Turn the fasteners 90 degrees clockwise to lock.
|