GAP BETWEEN INSTR. PANEL UPPER TRIM PAD & INSTR. PANEL ASSEM.

VEHICLES AFFECTED: 1989 CADILLAC C (SIR)

The following procedure covers correcting the gap between the left side upper trim panel and instrument panel assembly on 1989 Cadillac S.I.R. (airbag) vehicles (option code AJ3).

1. Remove upper trim pad (see Service Manual).

2. Install push-in nut part number 1355003 to instrument panel assembly at side attachment point (see figure 1).

3. Re-install upper trim pad per service procedure EXCEPT use bolt/screw part number 20365259 in place of 11500677 at left attachment location only.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.