SMU - SECTION 8C - REVISED REMOVE/INSTALL PROCEDURE. Cadillac Fleetwood 1994

SUBJECT: SERVICE MANUAL UPDATE - SECTION 8C - REVISED REMOVE/INSTALL PROCEDURE FOR I/P COMPARTMENT DOOR LATCH AND LOCK CYLINDER ASSEMBLY

MODELS: 1994-96 BUICK ROADMASTER 1994-96 CADILLAC FLEETWOOD 1994-96 CHEVROLET CAPRICE, IMPALA

THIS BULLETIN IS BEING ISSUED TO REVISE THE REMOVE/INSTALL PROCEDURE FOR THE I/P COMPARTMENT DOOR LATCH AND LOCK CYLINDER ASSEMBLY IN SECTION 8C OF THE SERVICE MANUAL.

INSTRUMENT PANEL COMPARTMENT DOOR LATCH AND LOCK CYLINDER ASSEMBLY ==================================================================

FIGURE 1 (NUMBERS INDICATED IN PARENTHESIS BELOW REFER TO CALLOUT IN FIGURE 1.)

REMOVE OR DISCONNECT:

1. OPEN INSTRUMENT PANEL (I/P) COMPARTMENT DOOR (6).

2. BOLTS/SCREWS (8) FROM DOOR LATCH ASSEMBLY.

3. LATCH ASSEMBLY FROM COMPARTMENT DOOR (6).

4. PLACE LATCH IN LOCK POSITION.

5. LOCK CYLINDER ASSEMBLY (5) FROM DOOR LATCH ASSEMBLY.

A. TURN LOCK CYLINDER ASSEMBLY (5) TO LOCK POSITION AND REMOVE KEY.

B. USING AWL OR PAPER CLIP, SLIGHTLY DEPRESS LOCK TUMBLER BY INSERTING PAPER CLIP THROUGH HOLE AT BASE OF CYLINDER HOUSING.

C. INSERT KEY AND REMOVE AWL OR PAPER CLIP.

D. TURN KEY AND CYLINDER TO FULL CLOCKWISE POSITION (KEY HEAD UPSIDE DOWN).

E. REMOVE LOCK CYLINDER ASSEMBLY (5).

INSTALL OR CONNECT:

1. LOCK CYLINDER ASSEMBLY (5) TO DOOR LATCH ASSEMBLY (5).

A. DEPRESS ALL LOCK TUMBLERS ON LOCK CYLINDER (5) WITH FINGER.

B. INSERT KEY INTO LOCK CYLINDER ASSEMBLY (5).

C. INSERT KEY AND LOCK CYLINDER ASSEMBLY (5) INTO LATCH (KEY HEAD UPSIDE DOWN).

D. TURN KEY TO FULL COUNTERCLOCKWISE POSITION (KEY HEAD RIGHT SIDE UP).

E. REMOVE KEY.

2. BOLTS/SCREWS (8) ATTACHING LATCH TO I/P COMPARTMENT DOOR ASSEMBLY (6).

TIGHTEN:

BOLTS/SCREWS (8) TO 1.9 N.M (17 LB IN).

FIGURES: 01 ATTACHMENTS: 00

FIGURE 1: 5. CYLINDER, INSTRUMENT PANEL COMPARTMENT DOOR LOCK 6. DOOR, INSTRUMENT PANEL COMPARTMENT 7. BOLT/SCREW, INSTRUMENT PANEL COMPARTMENT 8. BOLT/SCREW, INSTRUMENT PANEL COMPARTMENT DOOR

Object Number: 93552 Size: MF

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.