The scan tool data lists contain all of the cruise control related parameters that are available on the scan tool used for the cruise control system. The data list column indicates the location of the parameter within the scan tool menu selections.
Use the scan tool data lists as directed by a diagnostic table or in order to supplement the diagnostic procedures. Begin all of the diagnostic procedures with Diagnostic System Check - Vehicle .
Use the Scan Tool Data List only after the following is determined:
• | There is no published DTC procedure nor published symptom procedure for the customer concern. |
• | DTC procedure and symptoms diagnostic procedures indicated in the system check fail to solve the customers problems. |
The typical data values are obtained from a properly operating vehicle under conditions specified in the first row of the Scan Tool Data List table. Compare the values obtained from the troublesome vehicles with the typical data, you may find where the trouble is.
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF/Vehicle is in Park or Neutral/Cruise On/Off Switch is Turned Off | |||
Brake Pedal Position (BPP) Status | Cruise Control/ Instrument Panel Module (IPM)/Brake Pedal Position (BPP) System Data | Known/Unknown/ Invalid/Undecided | Known |
Brake Pedal Signal Status | Cruise Control/Engine Control Module | Valid/Invalid | Valid |
Cruise Control Active | Cruise Control/Engine Control Module | Yes/No | No |
Cruise | Cruise Control/ Instrument Panel Module/Input | Count | 0 |
Cruise Disengage (1-8) History | Cruise Control/Engine Control Module | Reasons for Cruise Control Disabled | Varies |
Cruise Inhibit | Cruise Control/Engine Control Module | Yes/No | No |
Reasons for Cruise Disabled | Cruise Controls | Reasons for Cruise Control Disabled | Varies |
Cruise On/Off Switch | Cruise Control/Engine Control Module | On/Off | Off |
Cruise Resume/Accel. Switch | Cruise Control/Engine Control Module | Active/Inactive | Inactive |
Cruise Set/Coast Switch | Cruise Control/Engine Control Module | Active/Inactive | Inactive |
Engine Speed | Cruise Control/Engine Control Module | RPM | 650 RPM |
Initially Brake Applied Signal | Cruise Control/Engine Control Module | Applied/Released | Released |
Brake Slowly Applied Signal | Cruise Control/Engine Control Module | Applied/Released | Released |
Parking Brake Switch | Cruise Control/ Instrument Panel Module/Input | Applied/Released | Released |
Stop Lamp Pedal Switch | Cruise Control/Engine Control Module | Applied/Released | Released |
Stop Lamp Relay | Cruise Control/ Instrument Panel Module/Output | Applied/Released | Released |
Stop Lamp Status | Cruise Control/ Instrument Panel Module (IPM)/Brake Pedal Position (BPP) System Data | On/Off | Off |
Traction Control System Status | Cruise Control/Engine Control Module | Active/ Inactive | Inactive |
Vehicle Speed Sensor | Cruise Control/Engine Control Module | km/h (mph) | Varies |
APP Indicated Angle | Cruise Control/Engine Control Module | 0-100% | 0.0 |
BPP Circuit Signal | Cruise Control/Engine Control Module | Applied/Released | Released |
BPP Signal | Cruise Control/Engine Control Module | Applied/Released/ Invalid | Released |
Cruise Control Active | Cruise Control/Engine Control Module | Active/Inactive | Inactive |
Desired Idle Speed | Cruise Control/Engine Control Module | 0-7,000 RPM | 650 RPM |
Engine Coolant Temperature Sensor | Cruise Control/Engine Control Module | °C/°F | Varies |
Engine Oil Level Switch | Cruise Control/Engine Control Module | Normal/Low | Normal |
Engine Runtime | Cruise Control/Engine Control Module | 0:00:00 | Varies |
Ext. Travel BPP Signal | Cruise Control/Engine Control Module | Applied/Released/ Invalid | Released |
Ignition 1 Signal | Cruise Control/Engine Control Module | 0-25.5V | 12.8-14.2V |
Spark | Cruise Control/Engine Control Module | -- | -- |
Starter Relay Instructions | Cruise Control/Engine Control Module | On/Off | Off |
Transmission Control Module (TCM) Request Torque | Cruise Control/Engine Control Module | N·m (lb ft) | Variation Value |
Transmission Control Module (TCM) Torque Increased | Cruise Control/Engine Control Module | Yes/No | Variation Value |
Transmission Control Module (TCM) Torque Decreased Active | Cruise Control/Engine Control Module | Yes/No | Variation Value |
Traction Control System (TCS) Torque Increased | Cruise Control/Engine Control Module | Yes/No | Variation Value |
Traction Control System (TCS) Torque Decreased Active | Cruise Control/Engine Control Module | Yes/No | Variation Value |
Traction Control System (TCS) Torque Transfer Signal | Cruise Control/Engine Control Module | % | Varies |
Traction Control System (TCS) Torque Request Signal | Cruise Control/Engine Control Module | % | Varies |
Torque Management Ignition Retard | Cruise Control/Engine Control Module | ° | 0 |
Desired Throttle Position Angle | Cruise Control/Engine Control Module | % | Varies |
Indicated Throttle Position Angle | Cruise Control/Engine Control Module | 0-99% | Varies |
Vehicle Speed Circuit Status | Cruise Control/Engine Control Module | Normal/Incomplete/ Short to B+/Short/Open to Ground | Normal |