GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 SLS 🢒 Engine 🢒 Engine Controls and Fuel - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake

Removal Procedure

    Object Number: 1285245 Size: SH
  1. Turn the ignition OFF.
  2. Remove the front compartment sight shield, if necessary. Refer to Front Compartment Sight Shields Replacement .
  3. Disconnect the camshaft position (CMP) sensor electrical connector.

    4. Object Number: 1285251 Size: SH
  4. Remove the CMP sensor bolt.
  5. Remove the CMP sensor.

Installation Procedure

    Object Number: 1285251 Size: SH
  1. Install the CMP sensor.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the CMP sensor bolt.

    3. Tighten
    Tighten the bolt to 10 N·m (89 lb in).


    Object Number: 1285245 Size: SH
  3. Connect the CMP sensor electrical connector.
  4. Install the front compartment sight shields as necessary. Refer to Front Compartment Sight Shields Replacement .