Notice: Refer to Fastener Notice in the Preface section.
Important: Tighten the intake manifold bolts in a circular pattern starting at the center (long bolts) and moving outward.
Tighten
Tighten the upper intake manifold bolts to 23 N·m (17 lb ft).
Tighten
Tighten the intake manifold brace bolt/stud.
8.1. | Tighten the intake manifold brace bolt (2) to 65 N·m (48 lb ft). |
8.2. | Tighten the intake manifold brace stud (1) to 10 N·m (89 lb in). |
Notice: Ensure proper engagement of the wiring harness connector. The wiring harness connector must be installed straight onto the component connector and firmly seated. Visually inspect the connector to ensure that the connector latches are engaged and locked. Any damage to the connector or wiring must be repaired. Failure to follow this procedure can lead to an intermittent electrical connection, driveability concerns, and/or wiring harness or wiring harness connector damage or failure.