GM Service Manual Online
For 1990-2009 cars only

Special Tools

EN-48018 Flywheel Holding Tool

Removal Procedure


    Object Number: 1690147  Size: SH
  1. Remove the A/C compressor and power steering pump drive belt. Refer to Water Pump and Generator Belt Tensioner Replacement .
  2. Remove the generator and water pump drive belt. Refer to Air Conditioning Compressor and Power Steering Pump Belt Tensioner Replacement .
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  4. Remove the transmission bell housing inspection hole cover.
  5. Install the EN-48018 flywheel holding tool as shown.
  6. Remove the front air deflector. Refer to Front Air Deflector Replacement .

  7. Object Number: 902878  Size: SH
  8. Remove the crankshaft balancer. Refer to Crankshaft Balancer Removal .

Installation Procedure


    Object Number: 902878  Size: SH
  1. Install the crankshaft balancer. Refer to Crankshaft Balancer Installation .

  2. Object Number: 1690147  Size: SH
  3. Install the front air deflector. Refer to Front Air Deflector Replacement .
  4. Remove the EN-48018 flywheel holding tool.
  5. Install the transmission bell housing inspection hole cover.
  6. Install the generator and water pump drive belt. Refer to Air Conditioning Compressor and Power Steering Pump Belt Tensioner Replacement .
  7. Install the A/C compressor and power steering pump drive belt. Refer to Water Pump and Generator Belt Tensioner Replacement .