For 1990-2009 cars only
Left Side Harness Connections
- Disconnect the engine wiring harness from the left side fuel injectors.
- Disconnect the engine wiring harness from the left camshaft cover.
- Disconnect the engine wiring harness from the left coil assembly harness.
- Disconnect the engine wiring harness from the left camshaft position sensors.
- Disconnect the engine wiring harness from the evaporative emission (EVAP) purge solenoid.
- Disconnect the engine wiring harness from the throttle position sensor on the throttle body.
- Disconnect the engine wiring harness from the air conditioner compressor.
- Disconnect the engine wiring harness from the oil pressure sensor.
Right Side Harness Connections
- Disconnect the engine wiring harness from the right side fuel injectors.
- Disconnect the engine wiring harness from the right camshaft cover.
- Disconnect the engine wiring harness from right coil assembly harness.
- Disconnect the engine wiring harness from right camshaft position sensors.
- Disconnect the engine wiring harness ground from the intake manifold stud.
- Disconnect the engine wiring harness from the engine coolant temperature (ECT) sensor at the rear of the right cylinder head.
- Disconnect the starter motor wiring harness from the generator.
- Disconnect the engine wiring harness from the generator.
- Disconnect the engine wiring harness from the manifold absolute pressure (MAP) sensor.
- Disconnect the engine wiring harness from the knock and crankshaft position sensor wiring harness.
- Remove the engine wiring harness bracket from the engine block.
