• | J 28467-15 Engine Support Adapter |
• | J 28467-86 Engine Lift Bracket |
• | J 28467-87 Engine Lift Bracket |
• | J 28467-B Universal Engine Support Fixture |
Important: The following procedure is for supporting the engine in vehicle. The J 28467-15 is for supporting the engine in vehicle only. It is not intended to be used for lifting the engine once the engine is removed. The J 28467-86 that bolts to the left front cylinder head is used for engine support in vehicle and engine lifting once the engine is removed. The J 28467-87 is only used to lift the engine once the engine is removed from the vehicle. The J 28467-87 can not be used for engine support in vehicle due to limited access to the rear of the right cylinder head in the area where the bracket mounts.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the wire harness bracket bolt to 45 N·m (33 lb ft).