Schematic Reference: Data Communication Schematics

Connector End View Reference: Master Electrical Component List

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle

1. Use the scan tool to observe the driver and passenger door ajar switches.
2. Open and close each door.

Does the scan tool display change from Door Ajar to Door Closed?

Go to Step 3

Go to Symptoms - Doors

Replace the instrument panel module (IPM). Refer to Control Module References for replacement, setup, and programming.

Is the replacement complete?

Go to Step 4

--

Operate the system to verify the repair.

Is the failure removed?

System OK

Go to Step 1