Step | Action | Yes | No | ||||||
---|---|---|---|---|---|---|---|---|---|
Schematic Reference: Interior Lights Schematics Connector End View Reference: Lighting Systems Connector End Views | |||||||||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |||||||
2 |
Does the deck lid open? | Go to Step 3 | |||||||
3 | Do the courtesy lamps operate properly? | Go to Step 4 | |||||||
4 |
Does the test lamp illuminate? | Go to Step 5 | Go to Step 9 | ||||||
5 | Connect a test lamp between the courtesy lamp voltage supply circuit of the rear compartment lamp and the rear compartment lamp ground control circuit. Does the test lamp illuminate? | Go to Step 7 | Go to Step 6 | ||||||
6 | Test for an open or high resistance in the rear compartment lamp control circuit. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 12 | Go to Step 8 | ||||||
7 | Inspect for poor connections at the rear compartment lamp. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 12 | Go to Step 10 | ||||||
8 | Inspect for poor connections at the harness connector of the rear compartment lid release actuator. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition? | Go to Step 12 | Go to Step 11 | ||||||
9 | Locate and repair the following in the courtesy lamp voltage supply circuit of the rear compartment lamp:
Refer to Circuit Testing and Wiring Repairs . Did you complete the repair? | Go to Step 12 | -- | ||||||
10 | Replace the rear compartment lamp. Refer to Rear Compartment Courtesy Lamp Replacement . Did you complete the replacement? | Go to Step 12 | -- | ||||||
11 | Replace the rear compartment lid release actuator. Refer to Rear Compartment Lid Interior Release Latch Handle Replacement . Did you complete the replacement? | Go to Step 12 | -- | ||||||
12 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |