Removal Procedure
- Lower the headliner in order to access the sunroof motor/actuator. Refer to
Headlining Trim Panel Replacement
.
Important: If the sunroof is partially closed, remove the actuator before moving the sunroof forward.
- Disconnect the sunroof motor and control module electrical connector.
- Remove the retaining screws securing the sunroof actuator to the sunroof module.
- Remove the sunroof actuator and control module assembly.
Installation Procedure
- Manually move the sunroof window to the closed position.
- Install the sunroof motor and control module assembly to the sunroof positioning frame.
Notice: Refer to Fastener Notice in the Preface section.
- Install the sunroof motor and control module securing screws.
Tighten
Tighten the screws to 5.8 N·m (18 lb in).
- Connect the electrical connectors.
- Secure the electrical harness to the harness clip.
- Verify the operation of the sunroof.
- Install the formed headliner. Refer to
Headlining Trim Panel Replacement
.