Special Tools
J 22912-B Rear Pinion and Axle Bearing Remover
Important: Differential gear has a requirement of preload and cannot be disassembled or assembled at random.
- Remove the 10 ring gear bolts (1) and the ring gear (3) from the differential carrier (2) using a punch and a hammer through the bolt hole.
- Using
J 22912-B and a press, remove the left side bearing. It may be necessary to cut the bearing holder and remove the rollers so that the tool will grip the bearing race.
- Using
J 22912-B and a press, remove the right side bearing. It may be necessary to cut the bearing holder and remove the rollers so that the tool will grip the bearing race.