Circuit Description
The Driver Memory Wake-Up Switch is located at the left front door. The memory wake-up switch is pressed, the DDM inputs voltage and the DDSA receives voltage signal. Refer to
Memory Function
for the detailed information on memory
function operation.
DTC Descriptors
This diagnostic procedure supports the following DTCs:
| • | DTC B2755 Left Front Memory 1 Select Switch Circuit |
| • | DTC B2760 Left Front Memory 2 Select Switch Circuit |
| • | DTC B2765 Driver Memory Setup Switch Circuit Failure |
Conditions for Setting the DTC
If the DDS detects the memory switch is ON for more than 30 continuous seconds, the appropriate DTC will be set.
Action Taken When the DTC Sets
Ignore this operation, unless the switch is disconnected or the power mode is from OFF to RUN.
Conditions for Clearing the DTC
| • | The current DTC will clear if the failure signal is no longer present. |
Diagnostic Aids
| • | Refer to
Schematic and Routing Diagrams
. |
