GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 786527  Size: SH
  1. Remove the inside handle bezel from the inner door panel in the following order:
  2. 1.1. Hold the inside handle (1) to the open position.
    1.2. Insert a flat-bladed tool at the front lower corner of the bezel.
    1.3. Pry outward on the bezel.
    1.4. Remove the bezel from the inner door panel.
  3. Disconnect the electrical connector of the door lock switch.

Installation Procedure


    Object Number: 786533  Size: SH
  1. Snap the door lock switch into the door switch bezel.
  2. Connect the electrical connectors.
  3. Slide the bezel over the door handle.
  4. Snap the bezel into position by pushing on lower front corner of bezel.