GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 SLS 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Parking Brake Indicator Switch Replacement

Removal Procedure

    Object Number: 658944 Size: SH
  1. Remove the left sound insulator panel. Refer to Instrument Panel Insulator Replacement - Left Side .
  2. Disconnect the electrical connector from the park brake warning lamp switch.
  3. Remove the park brake warning lamp switch retaining bolt.
  4. Remove the park brake warning lamp switch.

Installation Procedure

    Object Number: 658944 Size: SH
  1. Install the park brake warning lamp switch to the park brake lever assembly. Align the locator pin to the locator hole.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the park brake switch retaining bolt.

    3. Tighten
    Tighten the screw to 2 N·m (18 lb ft).

  3. Connect the park brake warning lamp electrical connector to the park brake warning lamp switch.
  4. Install the left sound insulator panel. Refer to Instrument Panel Insulator Replacement - Left Side .