Transmission Fluid Cooler Hose/Pipe Replacement RWD
Special Tools
J 44827 Transmission Cooler Quick Connect
Removal Procedure
- Remove the radiator and condenser sight shield.
- Remove the engine air cleaner inlet pipe.
- Using the
J 44827 , disconnect the transmission oil cooler pipes from the radiator.
- Disconnect transmission oil cooler pipes from the transmission.
- Remove and discard the O-rings.
- Remove the TOC pipes.
Installation Procedure
- Install the TOC pipes.
Notice: Refer to Fastener Notice in the Preface section.
- Install new O-rings to the TOC pipes.
- Connect the TOC pipes to the transmission.
- Connect the TOC pipes to the radiator.
- Install the engine air cleaner inlet pipe.
- Install the radiator and condenser sight shield.