GM Service Manual Online
For 1990-2009 cars only

Special Tools

J 44827 Transmission Cooler Quick Disconnect

Removal Procedure


    Object Number: 1509806  Size: SH
  1. Locate the Transmission Oil Cooler (TOC) quick connect fitting (1).

  2. Object Number: 1509804  Size: SH

    Important: Be sure that the lock tang on the release tool is properly engaged.

  3. Install the J 44827 onto the TOC pipe.

  4. Object Number: 1509805  Size: SH
  5. Slide the J 44827 toward the TOC quick connect fitting.

  6. Object Number: 1509807  Size: SH
  7. Insert the J 44827 into the TOC quick connect fitting. The distance between the quick connect fitting and J 44827 should be approximately 2.00 mm (0.080 in).

  8. Object Number: 1509808  Size: SH
  9. Pull back on the TOC pipe to disengage the pipe from the TOC quick connect fitting.
  10. Remove the J 44827 from the TOC pipe.

Installation Procedure

    Important: Inspect the TOC quick connect fitting for signs of wear or damage. Replace the components if necessary.

  1. Install the TOC pipe into the TOC quick connect fitting.
  2. A distinct snap should be heard or felt when assembling the TOC pipe to the quick connect fitting.
  3. To ensure the cooler line is properly installed, give the cooler pipe a gentle pull.