1

2-6 and 3-5 Reverse Clutch Hub Thrust Bearing Assembly

2

2-6 and 3-5 Reverse Clutch (with Output Carrier Outer Sun Gear Shaft) Hub Assembly

3

1-2-3-4 Clutch Hub Thrust Bearing Assembly

4

1-2-3-4 Clutch (with Output Carrier Inner Sun Gear Shaft) Hub Assembly

5

4-5-6 Clutch Hub Thrust Bearing Assembly

6

4-5-6 Clutch (with Output Carrier Shaft and Dampener) Hub Assembly

Tip
Refer to 4-5-6 Clutch Dampener Overhaul for complete inspection.

7

Turbine Shaft Thrust Bearing Assembly

8

4-5-6 (with Turbine Shaft) Clutch Assembly

9

Input Sun Gear Thrust Bearing

Tip
Thrust bearing snaps onto input carrier assembly.

10

Input Sun Gear Thrust Washer

11

Input Carrier Assembly

12

Input Sun Gear

13

1-2-3-4 and 3-5 Reverse Clutch Assembly

Tip
Wiggle the DT 47781 in order to align the 1-2-3-4 and 3-5 reverse clutch plates with the external splines of the 4-5-6 clutch assembly. To verify that the 1-2-3-4 and 3-5 reverse clutch assembly is fully installed, lift up on the turbine shaft. There should not be any noticeable slack.

Special Tools

DT 47781 C1234 35R Clutch Assembly Installer