For 1990-2009 cars only
Removal Procedure
- Remove the headliner in order to access the upper rear drain hose connections. Refer to Headlining Trim Panel Replacement .
- Disengage the drain hoses from the drain spouts on the rear of the sunroof module.
- Disengage the retainer clips from the rear upper drain hose (1).
- Remove the rear compartment trim panel. Refer to Rear Compartment Sill Trim Plate Replacement .
- Remove the rear lower drain hose from the retaining clips (1).
- Remove the rear drain hose (3) from the inner wheelhouse drain spout (2).
- Remove the drain hose from the vehicle.
Installation Procedure
- Guide the drain hose through the rear shelf panel to the D pillar behind the shoulder belt retractor.
- Clip the rear lower drain hose (3) into the retention clips.
- Secure the drain hose retainer clips to the sheet metal.
- Ensure the electrical grommet to drain hose drain spout is not pinched off after drain hose installation.
- Install the rear compartment trim panel. Refer to Rear Compartment Sill Trim Plate Replacement .
- Clip the rear upper drain hoses (2) into position.
- Secure the rear drain hose to the drain spout.
- Inspect for proper drainage.
- Install the headliner (3) with an assistant. Refer to Headlining Trim Panel Replacement .
Important: Secure the lower drain hose to the drain spout (2) at the inner wheelhouse panel.
The only suitable lubricant is clean water for the drain hose to drain spout installation.
