GM Service Manual Online
For 1990-2009 cars only

Special Tools

J 36796 Clip Zip Fastener Remover

Removal Procedure


    Object Number: 2018018  Size: SH
  1. Lower the window. Use a flat-bladed tool to pry the door inner handle bezel cover to expose the screws.
  2. Use a flat-bladed tool to insert under the armrest trim cover and pry the trim cover to expose the screws.

  3. Object Number: 2018020  Size: SH
  4. Remove the door inner trim panel screws.
  5. Use J 36796 to loose the retainers around the edges of the door trim plate.

  6. Object Number: 2013196  Size: SH
  7. Pull the door trim panel up and out of the door.
  8. Disconnect the electrical connector.

Installation Procedure

  1. Connect the electrical connectors.

  2. Object Number: 2013196  Size: SH
  3. Position the electrical connector and door trim panel according to the positioning bench.
  4. Apply pressure to the door trim panel to lock the tab.
  5. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 2018020  Size: SH
  6. Install the door trim panel screw.
  7. Tighten
    Tighten the screw to 1 N·m  (9 lb in).


    Object Number: 2018018  Size: SH
  8. Install the door handle bezel cover.
  9. Install the armrest trim covers.