GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 819755  Size: SH
  1. Remove the blower and air inlet assembly. Refer to Air Inlet Assembly Replacement .
  2. Disconnect the electrical connector from the recirculation actuator.

  3. Object Number: 2013455  Size: SH
  4. Remove the recirculation actuator screws (1).
  5. Remove the recirculation actuator.

Installation Procedure


    Object Number: 2013455  Size: SH
  1. Install the recirculation actuator.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the recirculation actuator screws (1).
  4. Tighten
    Tighten the screws to 1 N·m (9 lb in).


    Object Number: 819755  Size: SH
  5. Connect the electrical connector to the recirculation actuator.
  6. Install the blower and air inlet assembly. Refer to Air Inlet Assembly Replacement .