GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 SLS 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Air Conditioning Compressor and Power Steering Pump Belt Tensioner Replacement

Removal Procedure
  1. Remove the generator and water pump drive belt. Refer to Water Pump and Generator Belt Replacement .
  2. Remove the power steering and air conditioning drive belt. Refer to Air Conditioning Compressor and Power Steering Pump Belt Replacement .

    3. Object Number: 887771 Size: SH
  3. Loosen the drive belt tensioner bolt.
  4. Remove the drive belt tensioner and bolt from the engine.

Installation Procedure

    Object Number: 887771 Size: SH
  1. Position the drive belt tensioner and bolt to the engine as an assembly.
  2. Ensure that the alignment pin on the rear of the tensioner assembly is aligned with the locating hole on the engine.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the drive belt tensioner bolt.

    4. Tighten
    Tighten the drive belt tensioner bolt to 50 N·m (37 lb ft).

  4. Install the power steering and air conditioning drive belt. Refer to Air Conditioning Compressor and Power Steering Pump Belt Replacement .
  5. Install the generator and water pump drive belt. Refer to Water Pump and Generator Belt Replacement .