GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 776830  Size: SH
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
  2. Front windshield wiper arms. Refer to Windshield Wiper Arm Replacement .
  3. Remove the air inlet grille panel (1). Refer to Air Inlet Grille Panel Replacement .
  4. Disconnect the electrical connector (4) from the windshield wiper motor.
  5. Remove the wiper motor module (6). Refer to Windshield Wiper System Module Replacement .

  6. Object Number: 1332265  Size: SH
  7. Remove the fasteners retaining the panel assemble to the instrument panel front end.
  8. Remove the panel assembly from the vehicle.

Installation Procedure


    Object Number: 1332265  Size: SH
  1. Install the air inlet housing panel assembly to the vehicle.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the fasteners retaining the panel assemble to the instrument panel front end.
  4. Tighten
    Tighten the nuts/bolt to 6 N·m (53 lb in).


    Object Number: 776830  Size: SH
  5. Install the wiper motor module (6). Refer to Windshield Wiper System Module Replacement .
  6. Install the electrical connector (4) to the windshield wiper motor.
  7. Install the air inlet grille panel (1,3). Refer to Air Inlet Grille Panel Replacement .
  8. Install the windshield wiper arms. Refer to Windshield Wiper Arm Replacement .
  9. Install the injector sight shield. Refer to Fuel Injector Sight Shield Replacement .