GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 819760  Size: SH
  1. Remove the right insulator panel. Refer to Instrument Panel Insulator Replacement - Right Side .
  2. Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement .
  3. Disconnect the blower motor electrical connectors.

  4. Object Number: 819758  Size: SH
  5. Disconnect the blower motor control module electrical connectors.

  6. Object Number: 819757  Size: SH
  7. Remove the blower motor retaining bolt (1).

  8. Object Number: 756313  Size: SH
  9. Remove the air inlet housing bolts to gain clearance for the blower motor.
  10. Remove the blower motor.

Installation Procedure


    Object Number: 756313  Size: SH
  1. Install the blower motor.
  2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 819757  Size: SH
  3. Install the blower motor bolt (1).
  4. Tighten
    Tighten the screws to 1.5 N·m (13 lb in).

  5. Install air inlet housing bolts.

  6. Object Number: 819758  Size: SH
  7. Connect the blower motor control module electrical connectors.

  8. Object Number: 819760  Size: SH
  9. Connect the blower motor electrical connectors.
  10. Install the instrument panel compartment. Refer to Instrument Panel Compartment Replacement .
  11. Install the right insulator panel. Refer to Instrument Panel Insulator Replacement - Right Side .