The SIR Scan Tool Data List contains all the restraint system related parameters that are available on the scan tool. Parameters in the list is in alphabetical order. Data List column refers to the position of the parameter in scan tool menu options.
According to requirements of the diagnostic table, use SIR scan tool data list as the amendment to diagnostic procedures. Start all diagnostic procedures form SIR Diagnosis System Check.
Use the SIR Scan Tool Data List after the following are determined:
| • | There is no published DTC procedure nor published symptom procedure for the customer concern. |
| • | The DTC or symptom diagnostic procedures indicated by the diagnostic system check does not resolve the customers concern. |
The typical data values are obtained from a properly operating vehicle under conditions specified in the first row of the Scan Tool Data List table. Compare the values obtained from the troublesome vehicles with the typical data, you may find where the trouble is.
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON, Engine OFF, Driver Seat Belt Buckled | |||
8-Digit GM Part Number | Module 2 Info | 8-digit number | 16XXXXXX |
Calibration ID | Module 1 Info | 4-digit number | Varies |
Component Serial Number | Module 2 Info | 4-digit number | XXXX |
Driver Seat Belt Status Changed this Ignition Cycle | Inputs | Yes/No | Yes |
Driver Seat Belt Status | Inputs | Buckled/Unbuckled | Buckled |
Driver Side Impact Sensor ID | Module 1 Info | 2-digit number | 43 |
Front End Sensor 1 ID | Module 1 Info | 2-digit number | 51 |
Front End Sensor 2 ID | Module 1 Info | 2-digit number | 51 |
Ignition Voltage | Data | V | 12 volts |
Julian Date of Build | Module 1 Info | 3-digit number | Varies |
Passenger Side Impact Sensor ID | Module 1 Info | 2-digit number | 43 |
ROM ID | Module 1 Info | 4-digit number | Varies |
Vin Information | Inputs | Number | Varies |
Year Module Built | Module 1 Info | 4-digit number | Varies |
