Removal Procedure
- Open the covers (1) on the assist handle base to reveal the retaining screws (2).
- Remove the 2 screws (2) that retain the assist handle to the roof panel.
- Remove the assist handle.
Installation Procedure
- Position the assist handle to the headliner.
Notice: Refer to Fastener Notice in the Preface section.
- Install the 2 fasteners (2) in order to retain the assist handle to the roof panel.
Tighten
Tighten the 2 screws to 9 N·m (80 lb in).
- Close the covers (1) on the assist handle base.