GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 SLS 🢒 General Information 🢒 General Information 🢒 Front Floor Console Replacement

Removal Procedure
  1. Remove the bridge console. Refer to Front Floor Console Extension Replacement - Center .
  2. Remove the front floor console extension trim panel. Refer to Front Floor Console Extension Panel Replacement .
  3. Remove the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement .
  4. Remove the ashtray assembly. Refer to Ashtray Side Panel Replacement .

    5. Object Number: 2013612 Size: SH
  5. Remove the bolts securing the front floor console to the I/P carrier.

    6. Object Number: 2013613 Size: SH
  6. Remove the bolts securing the rear of the front floor console to the floor.
  7. Disconnect the electrical connector, and remove the front floor console rearward and upward.

Installation Procedure

    Object Number: 2013613 Size: SH
  1. Connect the electrical connector, and install the front floor console.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the bolts securing the rear of front floor console to the floor.

    3. Tighten
    Tighten the bolts to 9 N·m (80 lb in).


    Object Number: 2013612 Size: SH
  3. Install the bolts securing the front floor console to the I/P carrier.

    4. Tighten
    Tighten the bolts to 9 N·m (80 lb in).

  4. Install the ashtray assembly. Refer to Ashtray Side Panel Replacement .
  5. Install the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement .
  6. Install the front floor console extension trim panel. Refer to Front Floor Console Extension Panel Replacement .
  7. Install the bridge console. Refer to Front Floor Console Extension Replacement - Center .