For 1990-2009 cars only
Important: Do not use a chemical flush.
Store used coolant in the proper manner, such as in a used engine coolant holding tank. Do not pour used coolant down a drain. Ethylene glycol antifreeze is a very toxic chemical. Do not dispose of coolant into the sewer system or ground water. This is illegal and ecologically unsound. Various methods and equipment can be used to flush the cooling system. If special equipment is used, such as a back flusher, follow the manufacturer's instruction. However, always remove the thermostat before back flushing the system.- Block the drive wheels.
- Place the transmission in PARK (P).
- Engage the park brake.
- Run the engine until the thermostat opens.
- Turn the engine OFF.
- Follow the drain and fill procedure using only clean drinkable water. Repeat the procedure if necessary, until the fluid is nearly colorless. Refer to Cooling System Draining and Filling .
- Fill the cooling system when flushing is complete. Refer to Cooling System Draining and Filling .
Caution: Approved safety glasses and gloves should be worn when performing this procedure to reduce the chance of personal injury.
