GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 SLS 🢒 General Information 🢒 Vibration Diagnosis and Correction 🢒 Front Wheel Bearing and Hub Replacement

Removal Procedure

    Object Number: 906772 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation.
  3. Remove the brake rotor. Refer to Front Brake Rotor Replacement.
  4. Disconnect the antilock brake system (ABS) electrical connector.
  5. Remove the electrical connector from the splash shield.

    6. Object Number: 904542 Size: SH
  6. Remove the wheel bearing/hub mounting bolts.
  7. Remove the wheel bearing/hub.

Installation Procedure

    Object Number: 904542 Size: SH
  1. Install the wheel bearing/hub.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the wheel bearing/hub mounting bolts.

    3. Tighten
    Tighten the bolts to 135 N·m (100 lb ft).


    Object Number: 906772 Size: SH
  3. Install the electrical connector to the splash shield.
  4. Connect the ABS electrical connector.
  5. Install the brake rotor. Refer to Front Brake Rotor Replacement.
  6. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation.
  7. Lower the vehicle.