Heater Outlet Hose Replacement LH2
Special Tools
J 38185
Hose Clamp Pliers
Removal Procedure
- Drain the cooling system. Refer to
Cooling System Draining and Filling
.
- Lower the vehicle.
- Remove the injector sight shield. Refer to
Fuel Injector Sight Shield Replacement
.
- Using
J 38185
, disengage the hose clamp and disconnect the heater outlet hose (1) from the heater pipe assembly.
- Remove the heater outlet hose (1).
Installation Procedure
- Install the heater outlet hose (1).
- Using
J 38185
, disengage the hose clamp and connect the heater outlet hose (1) to the heater pipe assembly.
- Using
J 38185
, disengage the hose clamp and connect the heater outlet hose (1) to the radiator hose outlet housing.
- Install the injector sight shield. Refer to
Fuel Injector Sight Shield Replacement
.
- Fill the cooling system. Refer to
Cooling System Draining and Filling
.
Heater Outlet Hose Replacement LY7
Special Tools
J 38185 Hose Clamp Pliers
Removal Procedure
- Drain the cooling system. Refer to
Cooling System Draining and Filling.
- Remove the battery tray. Refer to
Battery Tray Replacement.
- Remove the cowl panel retaining bolts.
- Remove the cowl panel.
- Using
J 38185 disengage the hose clamp and disconnect the heater outlet hose from the thermostat assembly connector.
- Remove the outlet heater hose from the engine cooling thermostat assembly.
- Using
J 38185 , disengage the hose clamp and disconnect the heater outlet hose from the heater core connector.
- Disconnect the heater outlet hose from the heater core.
- Remove the heater outlet hose.
Installation Procedure
- Install the heater outlet hose assembly into the vehicle.
- Install the outlet hose to the heater core.
- Using
J 38185 slide the clamp back into the original position on the hose.
- Install the heater outlet hose to the engine cooling thermostat assembly.
- Using
J 38185 slide the clamp back into the original position on the hose.
- Install the cowl panel.
Caution: Refer to Fastener Caution in the Preface section.
- Install the cowl panel retaining bolts.
Tighten
Tighten the bolts to 6 N·m (13 lb ft).
- Install the battery tray. Refer to
Battery Tray Replacement.
- Fill the cooling system. Refer to
Cooling System Draining and Filling.