GM Service Manual Online
For 1990-2009 cars only

    Note: Follow the procedure sequence in order to prevent drive belt mis-alignment and/or possible damage/distortion to the components.


    Object Number: 945862  Size: SH
  1. Place the generator bracket in position to the cylinder block.
  2. Loosely install the generator bracket bolts.
  3. Caution: Refer to Fastener Caution in the Preface section.

  4. Tighten the front lower generator bracket bolt.
  5. Tighten
    Tighten the front lower generator bracket bolt to 50 N·m (37 lb ft).

  6. Tighten the front upper generator bracket bolts.
  7. Tighten
    Tighten the front upper generator bracket bolts to 50 N·m (37 lb ft).

  8. Tighten the side generator bracket bolt.
  9. Tighten
    Tighten the side generator bracket bolt to 22 N·m (16 lb ft).


    Object Number: 1392404  Size: SH
  10. Place the generator in position to the generator bracket.
  11. Loosely install the generator side bolts. Ensure the short bolt is installed in the front lower position.
  12. Hold the generator firmly against the engine block.
  13. Tighten the generator side bolts.
  14. Tighten
    Tighten the generator side bolts to 50 N·m (37 lb ft).