GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SLS 🢒 Engine 🢒 Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Oil Filter Adapter Assemble

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1210954 Size: SH
  1. Install the oil pressure sender.

    2. Tighten
    Tighten the oil pressure sender to 20 N·m (15 lb in).


    Object Number: 1210952 Size: SH
  2. Install the NEW oil filter cartridge.
  3. If the oil filter cap O-ring is removed, install a NEW O-ring on the oil filter cap.
    4. 3.1. Ensure the O-ring groove is not damaged. Replace the oil filter cap if the O-ring groove is damaged.
    3.2. Protect the O-ring from damage during installation by covering the threads of the oil filter cap with tape or plastic wrap.
    3.3. DO NOT stretch the O-ring during installation.
    3.4. Roll the O-ring into position over the covered threads.
    3.5. Remove the tape or plastic wrap from the oil filter cap threads.
    3.6. Ensure the oil filter cap threads are clean.

    Object Number: 1306505 Size: SH

    Caution: Lubrication must be applied to the threads of the oil filter cap prior to installation. Failure to lubricate the oil filter cap threads can hinder later removal and cause possible oil filter cap damage.

  4. Lubricate the oil filter cap threads and O-ring with clean engine oil.

    5. Object Number: 1210948 Size: SH
  5. Install the oil filter cap.

    6. Tighten
    Tighten the oil filter cap to 25 N·m (18 lb in).