New Product Information. Cadillac SLS 2009

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2009 🢒 SLS 🢒 Engine 🢒 Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 New Product Information

The purpose of New Product Information is to highlight or indicate important changes from the previous model year.

Changes may include one or more of the following items:

•	Torque values and/or fastener tightening strategies

•	Changed engine specifications

•	New sealants and/or adhesives

•	Disassembly and assembly procedure revisions

•	Engine mechanical diagnostic procedure revisions

•	New special tools

•	A component comparison from the previous year

There are no changes to the fastener tightening specifications for 2007.

There are no changes to the engine specifications for 2007.

There are no changes to the sealants and/or adhesives used for model year 2007.

There are no changes to the engine disassembly or assembly procedures for 2007.

There are no revisions to the engine mechanical diagnostic procedures for 2007.

•	The piston clip remover and installation tool J 43654 has been replaced by EN-46745 .

•	The oil pressure gage adapter J 36648-A has been replaced by J-21867-6 .

A new design of timing components is being used. Fourth Design:

•	New secondary timing drive chains, Inverted Tooth (IT) design.

•	The camshaft position actuators incorporate new sprockets that correspond with the use of IT chains on the secondary timing drive system.

•	The intake camshaft position actuators are different for the left and right sides.

•	The left and right secondary timing drive guides are new due to the use of IT chains on the secondary timing drive system.

•	The intermediate timing drive sprockets are new due to the use of IT chains on the secondary timing drive system.

•	New intake camshafts.

•	New second design IT primary timing drive chain.

•	New second design IT crankshaft sprocket.