GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SLS 🢒 Engine 🢒 Engine Mechanical - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Camshaft Position Sensor Replacement - Bank 2 (Left Side) Exhaust

Removal Procedure
  1. Turn the ignition OFF.

    2. Note: Do not disconnect the power steering fluid lines/hoses from the reservoir.

  2. Remove the power steering fluid reservoir bolts and reposition the power steering fluid reservoir in order to provide access. Refer to Power Steering Fluid Reservoir Replacement.

    3. Object Number: 1285242 Size: SH
  3. Remove the camshaft position (CMP) sensor electrical connector.

    4. Object Number: 1285243 Size: SH
  4. Remove the CMP sensor bolt.
  5. Remove the CMP sensor.

Installation Procedure

    Object Number: 1285243 Size: SH
  1. Install the CMP sensor.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the CMP sensor bolt and tighten to 10 N·m (89 lb in).

    3. Object Number: 1285242 Size: SH
  3. Install the CMP sensor electrical connector.
  4. Install the power steering fluid reservoir. Refer to Power Steering Fluid Reservoir Replacement.