GM Service Manual Online
For 1990-2009 cars only

P/S Pump and A/C Compressor Drive Belt Tensioner


    Object Number: 1346197  Size: SH
  1. Place the P/S pump and A/C compressor drive belt tensioner in position to the camshaft position actuator housing. Ensure to properly locate the drive belt tensioner anchor pin in the recess in the camshaft position actuator housing.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the P/S pump and A/C compressor drive belt tensioner bolt.
  4. Tighten
    Tighten the P/S pump and A/C compressor drive belt tensioner bolt to 50 N·m (37 lb ft).

Generator Drive Belt Tensioner


    Object Number: 1346196  Size: SH
  1. Place the generator bracket in position to the engine.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Loosely install the generator bracket bolts.
  4. Tighten the generator bracket bolts in proper sequence.
  5. Tighten

        • Tighten the generator bracket front upper bolt to 50 N·m (37 lb ft).
        • Tighten the generator bracket rear upper bolt to 50 N·m (37 lb ft).
        • Tighten the generator bracket lower bolt to 50 N·m (37 lb ft).

    Object Number: 1346194  Size: SH
  6. Place the generator drive belt tensioner in position to the generator bracket. Ensure to properly locate the drive belt tensioner anchor pin in the recess in the generator bracket.
  7. Install the generator drive belt tensioner bolt.
  8. Tighten
    Tighten the generator drive belt tensioner bolt to 50 N·m (37 lb ft).