Removal Procedure
- Remove the right rear trim panel.
- Loosen the electronic suspension control (ESC) module nuts (3).
- Disconnect the ESC module electrical connector (1).
- Remove the ESC module (2).
Installation Procedure
- Install the ESC module (2).
Caution: Refer to Fastener Caution in the Preface section.
- Connect the ESC module electrical connector (1).
- Tighten the ESC module nuts (3).
Tighten
Tighten the nuts to 9 N·m (80 lb in).
- Install the right rear trim panel.