For 1990-2009 cars only
Removal Procedure
- Apply 2 layers of masking tape on the windshield next to the reveal molding being serviced.
- Starting from the top, use a plastic flat-bladed tool to pry the side molding from between the two retainers.
- Remove the side molding from the vehicle.
- If the molding is bent or damaged, replace the molding.
Installation Procedure
- If the windshield reveal molding retainer clips are bent or damaged, replace the clips.
- Align the top end of the reveal molding to the end cap tongue inside the opening of the roof rail.
- Install the reveal molding downward and align the reveal molding with the screw holes.
- Press down the side molding with even force so as to insert the side molding into the windshield retainer clips.
- Remove the masking tape.
- Clean the tape residue from the windshield.
