Front Side Door Lock Assembly Replacement

Preliminary Procedures

1. Remove the front side door trim panel. Refer to Front Side Door Trim Panel Replacement.
2. Remove the front side door water deflector. Refer to Water Deflector - Front Side Door.

1

Front Side Door Lock Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
5 N·m (44 lb in)

2

Front Side Door Lock Assembly

3

Front Side Door Lock Screw (Qty: 2)

Tighten
9 N·m (80 lb in)

4

Front Side Door Lock Assembly

Tip

1. Raise the window to the full up position.
2. The following items will need to be disconnected for removal and reconnected for installation:

•	Lock cylinder rod

•	Outside handle lock rod by opening the clip

•	Lock assembly electrical connector

3. Remove the lock assembly from the door with the inside handle cable assembly attached.