6
| Outside Rearview Mirror Glass
Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section.
Procedure
- Apply masking tape to the top of the outside of the mirror housing to prevent damage.
- Push the mirror face inward at the bottom until full travel is reached.
- Insert a
J 38778 or equivalent behind the glass and the first rib support and pry outward until the mirror face is released.
- When installing the mirror glass align the mirror face to the backing plate and apply pressure, using a rubber sanding block or equivalent, until an audible click is heard.
Special ToolsJ 38778 Door Trim Pad Clip Remover
|