GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SLS 🢒 Brakes 🢒 Antilock Brake System 🢒 Electronic Traction Control Switch Replacement

Removal Procedure

    Object Number: 1250989 Size: SH
  1. Remove the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement.
  2. Disconnect the traction control electrical connector.
  3. Remove the 2 traction control mounting screws (1).
  4. Remove the trim plate.
  5. Remove the traction control switch (2).

Installation Procedure

    Object Number: 1250989 Size: SH
  1. Install the traction control switch (2) to the trim plate.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the two traction control mounting screws (1).

    3. Tighten
    Tighten two traction control mounting screws to 2 N·m (18 lb in).

  3. Connect the traction control electrical connector.
  4. Install the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement.