Special Tools
- Remove the fluid pan drain plug (63) and seal (64), and allow the transmission fluid to drain.
- Put transmission in park.
- Install either the
J 45012 or
J 8614-01 , to hold the prop shaft flange (31) - model dependent.
Important: Discard retainer (30), seal (32), washer (33) and nut (34).
- Remove the prop shaft flange nut (34).
- Remove the prop shaft flange washer (33) and seal (32).
- Remove the prop shaft flange (31) and the output shaft assembly retainer (30).
- Slowly rotate the transmission to a vertical position, with the bell housing facing up, and allow any excess fluid to drain.