GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SLS 🢒 Transmission 🢒 Automatic Transmission - 5L40-E/5L50-E 🢒 Control Valve Body Accumulator Assembly Installation

    Object Number: 801804 Size: SH
  1. Install the NEW overdrive clutch fluid passage sleeve (39) into the case (24).
  2. Install the NEW center support fluid passage sleeve (38) into the case (24).

    3. Object Number: 802258 Size: SH
  3. Install the control valve body accumulator assembly (47) onto the case (24).
  4. Install the detent lever spring (52) onto the case (24).
  5. Install the control valve body bolts (53) into the case (24) and hand tighten.

    6. Object Number: 802259 Size: SH
  6. Install the control valve body accumulator assembly bolts (49, 51) into the case (24) and hand tighten.

    7. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 802251 Size: SH
  7. Tighten the control valve body accumulator bolts (49, 50, 51) in sequence.

    8. Tighten
    Tighten the control valve body accumulator bolts (49, 50, 51) to 11 N·m (8 lb ft).


    Object Number: 816745 Size: SH
  8. Install a 0.8 mm spacer (1) between the manual shaft detent lever (600) and the manual shaft detent assembly (52).
  9. Tighten the detent assembly bolts (53).

    10. Tighten
    Tighten the control valve body bolts (53) to 11 N·m (8 lb ft).

  10. Remove the spacer (1).