Special Tools

J 44827 Transmission Cooler Quick Disconnect

Note: It is not necessary to discharge the refrigerant from the A/C system during auxiliary Transmission Oil Cooler (TOC) front line replacement.

Remove the A/C condenser mounting bolts and reposition the condenser.
1. Reposition the condenser to access the auxiliary transmission oil cooler lines. Refer to Air Conditioning Condenser Replacement.
2. Disconnect the transmission oil cooler (TOC) lines from the TOC.
3. Disconnect the TOC line from the TOC retainer clip (1).



4. Remove the bolts that connect the TOC to the cooling fan shroud.



5. Remove the LH front wheel. Refer to Tire and Wheel Removal and Installation.
6. Remove the LH front splash shield retainers.
7. Remove the LH front splash shield.
8. Remove the rear TOC line to transmission bolt.
9. Disconnect the rear TOC lines from the transmission.
10. Remove and discard the seal.
11. Remove the TOC retainer bracket bolt.
12. Remove the TOC lines.

1. Install the TOC lines.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the TOC retainer bracket bolt.

Tighten
Tighten the bolt to 25 N·m (18 lb ft)

3. Install new seals to the TOC lines.
4. Connect the TOC lines to the transmission.
5. Install the TOC line to transmission bolt.

Tighten
Tighten the bolt to 25 N·m (18 lb ft)

6. Install the LH front splash shield.
7. Install the LH front splash shield retainers.
8. Install the LH front wheel. Refer to Tire and Wheel Removal and Installation.



9. Install the bolts that secure the TOC to the cooling fan shroud.

Tighten
Tighten the bolts to 6.5 N·m (58 lb ft)




10. Connect the TOC line to the TOC retainer clip (1).
11. Connect the TOC lines to the TOC.

Tighten
Tighten the bolts to 20 N·m (15 lb ft)

12. Reposition and reinstall the condenser. Refer to Air Conditioning Condenser Replacement.