GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SLS 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Pressure Relief Valve Replacement

Removal Procedure

    Object Number: 1453262 Size: SH
  1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement.
  2. Lift the lower flap of the pressure relief valve to expose the lower edge clip release tabs.
  3. Raise the pressure relief valve lower bottom fixing tabs. Remove the pressure relief valve by pulling the bottom edge of the valve away from the vehicle.

Installation Procedure

    Object Number: 1453262 Size: SH
  1. Position the pressure relief valve to the opening in the rear quarter panel.
  2. Press inward on the pressure relief valve until fully seated.
  3. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement.