Front Bumper Fascia Assembly Replacement

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the air deflector. Refer to Front Air Deflector Replacement.

1

Front Hood Retainer (Qty: 2)

2

Front Hood Assembly

3

Front Hood Retainer (Qty: 2)

4

Right Front Hood Assembly

5

Front Hood Retainer (Qty: 2)

6

Left Front Hood Assembly

7

Front Bumper Fascia Extension Retainer (Qty: 22)

8

Front Bumper Fascia Retainer (Qty: 2)

9

Front Bumper Fascia Side Lamp Electrical Connector

Tip
Disconnect the front bumper fascia side and fog lamp electrical connector.

10

Front Bumper Fascia Reinforcement Nut (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
9 N·m (80 lb in)

11

Front Bumper Fascia Reinforcement Screw (Qty: 2)

Tighten
9 N·m (80 lb in)

12

Front Bumper Fascia Assembly (Qty: 4)

Tip

1. Remove the retainers holding the fascia to the tie bar
2. If headlamp washer hose assembly is installed, disconnect it.