Repair Procedure
- Remove the steering wheel. Refer to
Steering Wheel Replacement.
- Wash the wood section of the wheel with wax and grease remover.
- Mask off the non-wood area of the steering wheel.
Important: Do NOT sand through the clear.
- Sand with 400 grit sand paper first. Finish sanding with 600 grit.
- Wash the wood section of the wheel again with wax and grease remover.
- Clear coat the steering wheel.
Refer to the 2003 GM Approved Refinish Materials Booklet, GM 4901 M-D-2003 (English) or M-D-F2003 (French).
- Install the steering wheel. Refer to
Steering Wheel Replacement.