GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SLS 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake

Removal Procedure

    Object Number: 1285245 Size: SH
  1. Turn the ignition OFF.
  2. Remove the front compartment sight shield, if necessary. Refer to Front Compartment Sight Shields Replacement.
  3. Disconnect the camshaft position (CMP) sensor electrical connector.

    4. Object Number: 1285251 Size: SH
  4. Remove the CMP sensor bolt.
  5. Remove the CMP sensor.

Installation Procedure

    Object Number: 1285251 Size: SH
  1. Install the CMP sensor.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the CMP sensor bolt and tighten to 10 N·m (89 lb in).

    3. Object Number: 1285245 Size: SH
  3. Connect the CMP sensor electrical connector.
  4. Install the front compartment sight shields as necessary. Refer to Front Compartment Sight Shields Replacement.