GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SLS 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Sound Barrier Replacement - Rear Seat Cushion to Floorpan

Removal Procedure

    Object Number: 708176 Size: SH
  1. Remove the rear seat back. Refer to Rear Seat Back Cushion Replacement.
  2. Remove the sound barrier to the wheelhouse panel.
  3. Remove the rear wheelhouse sound barrier from the vehicle.
  4. Remove the rear shoulder belts. Refer to Rear Seat Belt Retractor Replacement.
  5. Remove the center rear shoulder belt. Refer to Rear Seat Center Retractor Side Belt Replacement.
  6. Lift the rear floorpan sound barrier upward and pull outward in order to remove.

Installation Procedure

    Warning: All floor pan insulator material must meet Federal Vehicle Safety Standards for flammability. Failure to do so could result in personal injury and/or vehicle damage.


    Object Number: 708176 Size: SH
  1. Position the sound barrier to the floorpan.
  2. Position the sound barrier under the rear compartment trim.

    3. Note: Align the sound barrier in order to keep the seat belt and seat attachment areas clear.

  3. Ensure the attachment areas are clear.
  4. Route the sound barrier around the electrical harness.
  5. Route the sound barrier under the primary weather-strip on the outside edges.
  6. Press firmly in all areas in order to secure the sound barrier to the floorpan.
  7. Install the rear shoulder belts. Refer to Rear Seat Belt Retractor Replacement.
  8. Install the center rear shoulder belt. Refer to Rear Seat Center Retractor Side Belt Replacement.
  9. Position the rear seat back sound barrier to the wheelhouse panel.
  10. Install the rear seat back. Refer to Rear Seat Back Cushion Replacement.